Earn King Kong Reward Points 
-
Vendor:Up and Running
Up & Running Polaris RZR XP 1000 Rear Knuckle
Features Sold individually OEM quality Made of cast aluminum A Replacement That Won’t Break the Bank The saying “if it ain't broke, don’t fix it” doesn’t apply to your Polaris RZR XP 1000. If you wait until your knuckle breaks, you’re going to crash...- from $145.95
- from $145.95
- Unit price
- per
-
Vendor:Up and Running
Up & Running Polaris RZR RS1 Rear Knuckle
Features Sold individually OEM quality Made of cast aluminum A Quality Replacement at an Affordable Price Waiting until your rear knuckle breaks to replace it is a mistake. It’ll cause you to crash which can result in costly damage. Avoid that by replacing them...- $150.95
- $150.95
- Unit price
- per
-
Vendor:Up and Running
Up & Running Can-Am Maverick X3 Rear Knuckle
Features Sold individually OEM quality Made of cast aluminum High Quality Knuckle at an Affordable Price Your rear knuckles will wear out over time. Don’t wait until they break and you wreck your Can-Am Maverick X3 to replace them. Get the replacement you deserve....- $150.95
- $150.95
- Unit price
- per
-
Vendor:Up and Running
Up & Running Can-Am Maverick X3 Knuckle Spherical Bearing Kit
Features Bearings made of zinc-plated steel Replaces all four knuckle-to-trailing arm spherical bearings Matches OEM performance OEM quality without the OEM price Replace Your Can-Am X3 Knuckle Bearings When your rear knuckles start squeaking and clunking, you need to change those bearings. Get our...- $167.95
- $167.95
- Unit price
- per
-
Vendor:Up and Running
Up & Running Can-Am Maverick Rear Knuckle
Features Sold individually OEM quality Made of cast aluminum High-Quality Can-Am Maverick Knuckle at a Low Cost Your Can-Am Maverick’s rear knuckles will eventually wear out. Don’t wait until it's too late to replace them. Get the knuckles you need with SuperATV’s Up &...- $145.95
- $145.95
- Unit price
- per
-
Vendor:SUPERATV
SuperATV Polaris RZR XP 1000 Billet Rear Knuckles
Features Made of 7075 billet aluminum Virtually two times stronger than factory knuckles Compatible with stock and aftermarket suspension and wheel bearings Includes left and right rear knuckles Sick of Busted Knuckles? Can you think of a part that can ruin your day quicker...- $723.95
- $723.95
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 17-21 Can-Am Defender 500 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1231
All Balls Racing 17-21 Can-Am Defender 500 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle Two kits required per vehicle- $54.22
- $54.22
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 14-16 Polaris ACE 325 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1217
All Balls Racing 14-16 Polaris ACE 325 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle- $26.04
- $26.04
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 2020 Polaris RZR Turbo Pro XP Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh 50-1245
All Balls Racing 2020 Polaris RZR Turbo Pro XP Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and...- $42.74
- $42.74
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 12-13 Kawasaki Teryx 4 4x4 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1228
All Balls Racing 12-13 Kawasaki Teryx 4 4x4 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle Two kits required per vehicle...- $51.09
- $51.09
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 2014 Polaris RZR 4 800 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1223
All Balls Racing 2014 Polaris RZR 4 800 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle...- $40.66
- $40.66
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 18-20 Yamaha Viking 700 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1181-K
All Balls Racing 18-20 Yamaha Viking 700 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle- $76.13
- $76.13
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 14-17 Yamaha Viking 700 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1173-K
All Balls Racing 14-17 Yamaha Viking 700 Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle- $78.23
- $78.23
- Unit price
- per
-
Vendor:All Balls Racing
All Balls Racing 16-23 Yamaha YXZ1000R EPS Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. 50-1170-K
All Balls Racing 16-23 Yamaha YXZ1000R EPS Ind. Rear Sus. Knuckle only Kit - 2 Kits Req. Per Veh. Two kits required per vehicle Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms and knuckle- $83.45
- $83.45
- Unit price
- per
-
Vendor:HCR Racing
HCR X3 Rear 7075 Double Shear Capped Knuckle Set
SKU #500163Set of 2 (L&R) w/wheel bearingsKnuckles include: (1) ARP Bolt (1) ZRP anti-rotation locking cap w/screw (2) FK uniball bearings w/ (2) snaprings (4) ZRP misalignment spacers w/ (2) o-ring Threaded Cap Cap install tool- $1,999.00
- $1,999.00
- Unit price
- per
-
Vendor:HCR Racing
HCR X3 Front 7075 Double Shear Capped Knuckle Set
SKU#500172 L & R double shear front knuckle (4) ARP bolts (8) 7/8 uniball misalignment spacers (4) anti rotate locking caps w/screws LH & RH threaded cap Threaded cap removal/install tool OEM Wheel bearings installed & torqued- $2,999.00
- $2,999.00
- Unit price
- per
-
Vendor:SUPERATV
SuperATV Can-Am Maverick X3 Billet Rear Knuckles
Features Made of 7075 billet aluminum Virtually two times stronger than factory knuckles Compatible with stock and aftermarket suspension and wheel bearings Get Ready to Chuck Your Knuckles What would you do if your factory knuckle fell apart on the trail? Easy—first you’d crash...- $1,135.95
- $1,135.95
- Unit price
- per
-
Vendor:SUPERATV
SuperATV Polaris RZR RS1 Billet Rear Knuckles
Features Made of 7075 billet aluminum Virtually two times stronger than factory knuckles Compatible with stock and aftermarket suspension and wheel bearings Includes left and right rear knuckles Beef Up Your Knuckles If you like to ride solo on your RS1, you need to...- $723.95
- $723.95
- Unit price
- per
-
Vendor:SUPERATV
SuperATV Polaris RZR XP Turbo S Billet Rear Knuckles
Features Made of 7075 billet aluminum Two times stronger than factory knuckles Compatible with stock and aftermarket suspension and wheel bearings Includes left and right rear knuckles Don’t Crack a Knuckle The stock rear knuckles on your Turbo S are built for stock rides....- $890.95
- $890.95
- Unit price
- per
Newsletter Sign Up
Receive our latest updates about our products and promotions.
