Fabrication

Features Available Sizes: 1.5", 1.75", 2" diameter Constructed of heavy-duty steel tube Hardware is included Best for use on roll cages, roll bars and custom bumpers and nerf bars Delivers raw steel so you can match your machine If you’re the ultimate DIY-er fabricating...

Heavy duty clamp mounting tab for 1.75" - 1.85" Tubing. Has multiple positions, made of aluminum, great for lights, whips, antenna, and other accessories. Very strong and durable mount!

Thumb Screw with Rubber Washer (4 pack)   1/4" bolt with plastic molded head for easy install or removal. The package includes 4 thumb screws and washers.  High quality stainless steel for long lasting outdoor use.   Please be sure to purchase the correct length...

TERYX MOUNTING BAR - BLACKTR-AP220-BM

Features Universal fitment Aluminum Laser engraved markings Helps prevent pull-out & pull through Protects the surface finish Assault Industries beauty washers look great and provide additional surface area coverage over holes like traditional washers and protect the finish while helping to prevent pull out...

50 Caliber Racing Steel Weld In Bung for 1.25" OD .120 Wall Round Tube - 5/8-18 Threaded Through Heavy duty weld in bung with 5/8-18 threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is...

50 Caliber Racing Sway Bar Fab Kit - 3/4-16 x 3/4" Bore Chromoly Heims & Bungs for 1.75" OD Tubing, .095 or .120 Wall Rod end fabrication kit complete with 3/4 x 3/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube...

Sway Bar Fab Kit - 1/2-20 x 1/2 Bore Chromoly Heims & Bungs for 1" OD Tubing, .095 or .120 Wall Rod end fabrication kit complete with 1/2 x 1/2 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapter). Designed specifically for...

50 Caliber Racing Panhard Bar Rod End Kit - 3/4"-16 x 3/4" Bore Chromoly Heims, Bungs for 1.5" OD Tubing Rod end fabrication kit complete with 3/4 x 3/4 heat treated chromoly heim joints, jam nut, and a weld in bung (tube adapter). Designed specifically for 1.5"...

50 Caliber Racing Panhard Bar Rod End Kit - 3/4"-16 x 3/4" Bore Chromoly Heims, Bungs for 1.75" OD Tubing Rod end fabrication kit complete with 3/4 x 3/4 heat treated chromoly heim joints, jam nut, and a weld in bung (tube adapter). Designed specifically for 1.75"...

Split Collar Tube Clamp 1.5" I.D. - for Fabricating Bolt-on Accessories50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire...

50 Caliber Racing Panhard Bar Rod End Kit - 7/8"-14 x 7/8" Bore Chromoly Heims, Bungs for 1.5" OD Tubing, .120 or .250 WallRod end fabrication kit complete with 7/8" thread x 7/8" bore chromoly heim joints, jam nuts, and chromoly weld in bungs (tube adapters). Designed specifically...

Panhard Bar Rod End Kit - 5/8-18 x 5/8 Bore Chromoly Heims, Bungs for 1" ID Tubing Rod end fabrication kit complete with 5/8 x 5/8 heat treated chromoly heim joints, jam nut, and a weld in bung (tube adapter). Designed specifically for 1.25"...

50 Caliber Racing Sway Bar Fab Kit - 3/4-16 x 3/4" Bore Chromoly Heims & Bungs for 1.5" OD Tubing, .095 or .120 Wall Rod end fabrication kit complete with 3/4 x 3/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube...

Single Joint Rod End Kit - 1/2 Chromoly Heim Joint with Bung for 1.0" OD TubingSingle rod end kit including a 1/2 x 1/2 heat treated heim joint, jam nut, and a steel weld in bung tube adapter. Designed specifically for 1.0" OD tubing with with...

50 Caliber Racing Panhard Bar Rod End Kit - 1/2-20 x 1/2 Bore Chromoly Heims, Bungs for 1" OD Tubing Rod end fabrication kit complete with 1/2 x 1/2 heat treated chromoly heim joints, jam nut, and a weld in bung (tube adapter). Designed specifically...

50 Caliber Racing Heavy Duty Chromoly Uniball Spherical Bearing Fabrication KitComplete kit including bearing, cup and snap ring. Our uniball spherical bearings are made from 4130 chromoly alloy with a self lubricating PTFE (nylon/teflon) liner for smooth, long lasting performance and easy maintenance. Precision machined...

50 Caliber Racing Heavy Duty Chromoly Uniball Spherical Bearings Our uniball spherical bearings are made from chromoly alloy with a self lubricating PTFE (nylon/teflon) liner for smooth, long lasting performance and easy maintenance. These heavy duty bearings are just what you need for fabricating...

Sway Bar Fab Kit - 5/8-18 x 5/8 Bore Chromoly Heims & Bungs for 1.25" OD Tubing, .095 or .120 Wall - Optional High Misalignment Spacers Rod end fabrication kit complete with 5/8 x 5/8 heat treated chromoly heim joints, jam nuts, and weld...

50 Caliber Racing Sway Bar Fab Kit - 7/8-14 x 7/8" Bore Chromoly Heims & Bungs for 1.75" OD Tubing, .120 or .250 WallRod end fabrication kit complete with 7/8" thread x 7/8" bore chromoly heim joints, jam nuts, and chromoly weld in bungs (tube adapter)....

Weld on tube clamp for Fabricating Bolt-on AccessoriesCNC machined for accurate fit. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.* Price is for one clampSpecifications:1.75" ID - fits...

50 Caliber Racing Steel Weld In Bung Threaded Through. Heavy duty weld in bung with threaded center hole. Used for fabricating custom tie rods, control arms, sway bar links and more. Center hole is threaded all the way through for maximum strength. Available in...

Split Collar Tube Clamp 1.75" I.D. - for Fabricating Bolt-on Accessories 50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare...

Split Collar Tube Clamp 2" I.D. - for Fabricating Bolt-on Accessories 50 Caliber Racing heavy duty, weldable steel split collar tube clamp. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare...

50 Caliber CNC Billet Aluminum Roll Cage End Caps Open roll cage tubes just don't look nice, and plain black caps are boring. Our CNC billet aluminum cap slips into the end of 1.75" .095  tubing , giving you a custom, finished look to...

Flanged Threaded Through Weld In Bung - 1.25" .095 Round with 1/2" x 20 Threads Weld on bungs milled from solid round stock with 1/2" threaded hole threaded through. Perfect for creating strong and consistent mount points for any fabrication project. Flanged to allow...

Rubber end caps for tubing 1", 1.25", and 1.5"Rubber End Cap'st for pipe fence tube cover roll cage. These end caps are great for any 1.25 inch tubing, piping, fence, roll bar, etc.  * You will get 10 End Caps - Fits many applications - Set of...

Made from steel and safe for welding.

Made from steel and safe for welding.

Installation Instructions Click Here If you've tried to pull your rear radius rods, you already know the problem. Can-Am locks the radius rod nuts down with heavy-duty Loctite from the factory. When you go to break them loose, the spot welds inside the frame...